Multiple Springs

One of the oldest and most necessary parts of the machine – spring. Spring is a spring consisting of a first or a stack of plates to bending. As a kind of coil spring has all the properties characteristic of the springs. Despite this happens that some machines softer leaf spring suspension. This means that the spring have made a firm.

But the springs have special characteristics. Plus, the spring screw in that it is practically impossible to destroy. When you compress the coils will fall on each other and spring spring will not suffer, at least broken and only the wheels, frames and bridges. A spring due to bending can be completely destroyed. The same applies to tensile screw springs.

There are different types of springs, they can be odnolistovye, Multiple-and malolistovye. Leaf springs in our country are the most common because thanks to them can be evenly split the load. In These result in a rigid structure and can do without the other structures for holding the bridge. In this design all the sheets spring will serve roughly the same period as are in the same conditions. Another plus that due to the deflection decreases buildup of the car. Often it can not use shock absorbers. To make the leaf springs used carbon spring steel. In order to give the desired deflection Richter sheets, and the stamp mills. Then the sheets are subjected to heat treatment. Spring on the car fixed ladders. It is possible to mount the top and bottom. As for any arrangements for the springs to be watched. When proper care of your car springs will last you much longer. For on that spring work to do sometimes pull up ladders and sheets regularly lubricate springs. Very convenient that in order to lubricate the springs they should not be removed from the vehicle. First to lift the car, the wheels were hanging over the floor. Then the lower ends of shock absorbers struts should be separated from the lining of springs. Then bend the fabric, which wrapped up spring and thoroughly lubricate the springs sheets of graphite lubricant. For unclamping all possible to use a screwdriver. Once a year, spring should be removed and dismantled for cleaning and lubrication. If there is something damaged gaskets must be replaced. After As you will gather again spring abundantly it, you need to grease got all the space between the sheets. Well, first of all take care of your car and suspension. Manage your car carefully and avoid the bad roads.

Tags:

Comments are closed.